Appalachian Collection

This is a rain-through system that is installed just like composite decking with hidden fasteners.

Five different colors to choose from

Aged Teak

American Walnut

Driftwood

Silver Maple

White Ash

How the Appalachian Decking System Works

The Appalachian decking system is built over a new, or existing, deck frame made from wood, or metal. It works great for elevated decks, docks, stairs, or installed on the ground.

Grooved Board

These are the primary deck/stair surface boards. They are fastened using the starter clip at the ends, then the grooved clip, which goes between the boards.

Starter Clip

Surface mounted clip to hold down the perimeter of the surface boards. This clip is fastened before mounting the board. (this clip is the same as the Single Fascia Clip)

Grooved Clip

Use to hold down all of the deck surface boards, except the edge.

Edge Board

Used on the exposed perimeter of the deck/stairs, as they have a finished edge. The one side is grooved, and held down using the groove clip. (the groove clip can hold three boards at the same time) The other side, has an internal groove, which is held down, using either the Starter Clip or the Edge Clip.

Edge Clip

A side mounted clip to hold down the perimeter of the surface board. This clip is fastened after the board has been placed

AppalachianProducts

Tanzite’s Appalachian decking system consists of two boards and three clips for the deck surface. Simply add the square footage you need to the cart and we will get it shipped to you right away!