Ir directamente a la información del producto
1 de 4

Tanzite StoneDecks

CLIP DE DOBLE FASCIA Y SUJETADOR PARA MADERA / METAL 25 UDS (25 PIES LINEALES/PAQUETE)

CLIP DE DOBLE FASCIA Y SUJETADOR PARA MADERA / METAL 25 UDS (25 PIES LINEALES/PAQUETE)

Este clip se usa para sujetar la parte inferior de una y la parte superior de la siguiente, Fascia Boards al costado de la terraza. Empaquetado en bolsas que contienen 25 clips y 25 sujetadores de madera, ambos hechos de acero inoxidable 316 (grado marino). Por lo tanto, estos son adecuados en condiciones saladas, incluido el uso en el océano.
Precio habitual
Precio habitual $0.00 USD Precio de oferta $29.95 USD
Oferta Agotado
Impuesto incluido.
Material

Weight

Bundle Weight (kgs)
0.6268187848 kg
Bundle Weight (lbs)
1.38 Lbs

Bundle Info

  • 25pcs/pack

Shipping Info

El costo de envío dependerá del peso total de su pedido. Simplemente agregue todo lo que necesita a su carrito y calculará automáticamente el envío. *Tenga en cuenta que el costo del envío será hasta el almacén más cercano a usted. La entrega en la acera está disponible a un costo adicional.

How to use

Appalachian Decking System

Tanzite’s Appalachian decking system consists of two boards, and three clips for the deck surface, and one board with three different clips for the sides, or fascia, of the deck. Groove Boards - these are the primary deck/stair surface boards. They are fastened using the starter clip at the ends, then the grooved clip, which goes between the boards.

Edge Boards - these are used on the exposed perimeter of the deck/stairs, as they have a finished edge. The one side is grooved, and held down using the groove clip. (the groove clip can hold three boards at the same time) The other side, has an internal groove, which is held down, using either the Starter Clip or the Edge Clip.

Fascia Boards - these are used on the vertical sides of the deck, or stairs. The very top board is secured using either the High-rise Clip or the Single Fascia Clip. The very bottom board is held using the Single Fascia Clip. If you have more than a single row, use the Double Facia Clip between each.

Grooved Clip - used to hold down all of the deck, surface boards, except the edges.

Starter Clip - surface mounted clip to hold down the perimeter of the surface boards. This clip is fastened before mounting the board. (this clip is the same as the Single Fascia Clip)

Edge Clip - a side mounted clip to hold down the perimeter of the surface board. This clip is fastened after the board has been placed.

Single Fascia Clip - this clip is used to secure the top and bottom of the Fascia boards. Can be used in place of the Double Fascia Clip. (this clip is the same as the Starter Clip)

High-Rise Clip - this clip is used to hold the fascia above the level of the rim joist. This allows the fascia board to be mounted, even with the top of the deck surface, hiding the sides of the surface boards.

Double Fascia Clip - this clip is used between each of the Facia Boards. It holds both the bottom of one, then the top of the next Fascia Board."

Ver todos los detalles